My only real issue with the 205 was that it was big. Too big to wear as an all-day watch. The nuisance of having to swap watches for runs prompted me to buy the smaller Garmin 610 a bit over a year ago (I’ve since sold the 610 and now have a Garmin 620).

Over the past few years Garmin has released out a few successors to the 205/305. First came the 310XT (still available, under $200 at Clever Training). The 310XT was marketed as a triathlon/multisport watch – it boasted ~20 hrs of battery life, easy swapping between wrist and bike mount, and a waterproof housing that could be worn while swimming. The 310XT was followed by the Garmin Forerunner 910XT, which maintains the big battery life (also ~20 hours) and waterproof housing, but adds additional bike and swim tracking features.

Clever Training sent me a sample of the Garmin Forerunner 910XT to try out (it was a loaner and will be returned to them after this is published). I’m going to keep this review short because I’m not a triathlete – I have not used any of the bike or swim oriented features (check out DC Rainmaker’s 910 XT review for more on these aspects of the device). My comments below are geared toward the runner who might be interested in this watch.

After spending some time with the 910XT I’ve concluded that for a runner, this watch is pretty similar to the old 205/305. It’s a bit bulky – slimmer than the 205/305, but still not an all-day watch. It has a big, easy to read screen that allows up to 4 data fields and a ton of field customization options. And it’s rock-solid when it comes to recording accuracy. All are things I loved about the 205.

I loaned the 910XT to my buddy Brett to use in the VT50K last Fall, and as an example of recording accuracy here was the result:

Only one-third of a mile short over 31 trail miles is pretty darned solid (~99% accurate).

Where the 910XT improves on the 205/305 (I never tried the 310XT) is with its multisport/triathlon features (again, read DC Rainmaker’s review for more on these, he evaluates them far better than I could) and the fact that it doubles the battery life. It also connects to satellites a bit faster, which is nice.

The big question for a runner is: “Do I really need a bulky, $399 GPS watch?”

My answer would be maybe. It really depends on what your needs are.

Battery life is the major (only?) reason why some runners might need a watch like the 910XT. For example, ultrarunners would benefit from a battery that lasts well over 10 hours. The 910XT should cover most people up to 50 miles, and might even work for particularly fast 100 mile racers like my buddy Nate who ran sub 20:00 at Vermont 100 last year. There aren’t a lot of other options for GPS watches with big battery life – others that I’m aware of that run 20+ hrs are the $500 Suunto Ambit2 and the Garmin Fenix (which DC Rainmaker did not review glowingly for runners; the Fenix 2 is coming later this month, but don’t know much about it). The other potentially appealing feature of the 910XT for ultrarunners is the barometric altimeter, which should record elevation data more accurately than other watches.

The other two situations I could see where this watch would be a good fit would be for a runner who also does a lot of hiking and wants to track that as well, or for a runner who might want to keep a door open for triathlons in the future. In most other cases a cheaper, smaller watch should suffice.

Conclusion

The Garmin Forerunner 910XT is a power-packed watch targeted at multisport athletes. It’s probably more watch than is necessary for most runners, however, super long battery life sets it apart from most other GPS running watches. If you need a big battery, the 910XT would be an excellent choice.

Garmin Forerunner 910XT Purchasing Options

The Garmin Forerunner 910XT is available for purchase at Clever Training. Clever Training specializes in fitness electronics, and has agreed to provide a 10% off discount to Runblogger readers on most products that they carry – just enter the code RunBlogXJT at checkout.

Purchases made at Clever Training support this site and help me to write reviews like this one. Your support is very much appreciated!

Well, thanks to my affiliate partner Clever Training (they offer 10% off to readers with code RunBlogXJT), kid’s won’t be the only ones having fun on Halloween. One lucky Runblogger reader will win a “Halloween Edition” black and orange Garmin FR10 on Halloween Eve.

To enter the contest, all you need to do is complete one or more of the tasks in the form below by midnight on Thursday. Due to shipping restrictions, winner must be a resident of the United States. Good luck!

Last year I was contacted by Timex about trying the Run Trainer GPS 1.0. They sent me a sample, but I had nothing but trouble with it. It was not intuitive to use (took me forever to even figure out how to start a workout!), and the watched crashed on me on at least three occasions, all of which required reinstallation of the firmware to get it working again. I wound up not using it enough to be able to formulate any kind of meaningful review.

Several months ago Timex contacted me again to ask if I’d be interested in trying out the Run Trainer 2.0. Given my experience with the original, I was interested to see how they might have improved the watch (simply functioning consistently would have been a solid improvement!). I’ve now used the Run Trainer 2.0 on and off for a few months, and now feel comfortable formulating a review. (Disclosure: this product was a media review sample provided free of charge by Timex)

I’ll start by saying that the Run Trainer 2.0 (RT2) is a vast improvement over the original in terms of both design and functionality. I’d go so far as to say that if I didn’t already own a Garmin Forerunner 610, I’d be completely pleased with the RT2 as my go-to GPS watch.

Construction/Build

In terms of construction, the RT2 is a slightly smaller watch than the original, which makes it much more suitable for all-day wear. It also has a square watch-face vs. the somewhat oval face of the RT1:

Timex Run Trainer 2.0 (left), Run Trainer 1.0 (right – battery not charged, hence the blank screen)

Compared to the Garmin 610, the Run Trainer 2.0 is a bit thicker and the face appears to be just a bit larger, though that may be simply because it is square rather than round:

Timex Run Trainer 2.0 (left), Garmin Forerunner 610 (right)

I’m not crazy about the wristband of the Run Trainer 2.0. I find that when I get the watch wet the band irritates my skin and I have to take it off until it dries. It’s not terrible, and it might just be a sensitivity unique to me.

One of the things I really like about the RT2 are the buttons. The buttons on the original Run Trainer were difficult to press, and the buttons on the RT2 are much improved in this regard. In fact, I vastly prefer the button navigation system on the RT2 over the touch screen interface of my Garmin 610. The latter is very poorly implemented in my opinion, and is a gimmick more than anything else.

There are 5 buttons on the RT2 – rather than list what they do, here’s an image that shows them clearly labeled:

Menus/Navigation

Pressing the orange MENU/SELECT button brings up a screen with five options to choose from – the user interface is simple and very intuitive, much better than on both the previous Run Trainer and the Garmin FR610:

To start a workout you simply select “Chrono” and the watch asks if you’d like to search for sensors:

Sensor options for the Run Trainer 2.0 include GPS, an ANT+ heart rate monitor, and an ANT+ foot pod. The watch can be purchased with or without the heart rate monitor ($50 price difference), and an optional foot pod is available for purchase separately. I already have a Wahoo Fitness Stride Sensor, and was able to sync it with the Timex watch without a problem (the Wahoo Sensor is about $15 cheaper than the Timex foot pod at Clever Training).

Connecting to satellites is pretty quick, especially if you tend to start each run from the same spot. No complaints there for me.

Back on the menu screen, the “Interval” option allows you to start an interval workout, which is configurable in the watch settings (or in the Timex Device Agent software). “Review” lets you view data from workouts stored on the watch.

The “Settings” menu on the Run Trainer 2.0 lets you configure all kinds of stuff. A few of the configurable options include (it’s worth noting that all of these options are also configurable via the Timex Device Agent software if you prefer to not do it directly on the watch):

1. Hands Free – let’s you set auto-lap and auto-pause features. For auto-pause you can specify a threshold speed below which the watch will automatically go into pause mode. The watch gives a nice vibration/buzz with each lap.

2. Units – allows you to switch between miles and km, MPH vs. KPH, etc.

3. User Info – allows you to program in your height, weight, age, etc. I assume these are used to calculate calories burned.

4. Display – the RT2 provides three configurable screens for each workout mode, and on each screen you can choose to show 2 or 3 lines of data. You toggle between screens during a workout by pressing the lower left button on the watch. There are a ton of data field options to choose from, so data junkies will not be disappointed – options include:

5. Other configurable options include the ability to set pace and HR zones, nutrition alerts, an alarm, and an option to switch the screen from a traditional black on gray to gray on black:

Performance

When it comes to a GPS watch, the real test is how well it performs during a workout. My experience with the Run Trainer 2.0 has been positive, but there is one nagging issue that may not really be an issue. Let me explain.

Having been a Garmin user for a long time, I’m very used to the distance tracking on Garmin watches. Most other watches I have tried tend to report workout distances that are just a tad shorter than those recorded on my Garmins. This is the case with both of the Timex watches I have tried. The Run Trainer 2.0 consistently measures my runs about 1% shorter than my Garmin 610. I had the same issue with a Soleus GPS 1.0 watch and the Timex Run Trainer 1.0.

Now, I must admit that I don’t know whether the Garmins are measuring long, or the other watches are measuring short. It’s just that I’m used to the Garmins and all of my regular run mileposts have been set according to my Garmin watches. When I get to my 1-mile from home orange mailbox and the Timex doesn’t buzz it bugs me. I have major OCD when it comes to run distances, and I’m a bit obsessive about round numbers! When I reach mile 10 on my Garmin, I feel compelled to run the extra tenth of a mile to get the Timex to a round number as well. From a purely practical standpoint, 99% congruency between the watches is pretty darned good, so this is kind of a silly thing to nitpick about.

The other area where the Run Trainer falls short of the Garmin in terms of workout tracking is real time pace – I feel like my Garmin is more stable in this area.

Two other things to note about the watch as a workout tracker. First, battery life has been excellent for me. The battery specs indicate 8-hours of run time with the GPS enabled, more with the GPS off. I have found battery life to be more than sufficient, so unless you plan to run 50K or longer this watch should handle just about anything (battery life was a concern with the Garmin FR10 which I reviewed a few months ago).

Second, the watch does not store a lot of workouts. I was getting alerts about the memory being full quite often, and resorted to simply deleting a lot of older workouts since I had not been syncing regularly with my computer (I always wore my Garmin 610 simultaneously for comparison). If you don’t plan to upload workouts frequently this could become a problem.

Workouts on the Run Trainer are uploaded to Training Peaks via a USB cord and the Timex Device Agent software. I don’t use Training Peaks to track my workouts, so can’t comment much on that, but the Device Agent software works well. Here’s a capture of my Device Agent upload screen showing some workouts from the summer:

Once I download the run data, it gets stored in a TrainingPeaks folder in the “My Documents” folder on my PC. From there it’s pretty easy to import the workout files into SportTracks (my primary workout log software) – here’s a capture of the SportTracks workout upload interface:

One negative for me with the RT2 is that Timex devices are not supported by dailymile.com, which is the other place I store my runs.

Conclusion

I’ll finish off this review by summarizing the key pros and cons as I see them when comparing the Timex Run Trainer 2.0 to my everyday GPS watch, the Garmin Forerunner 610 (note: the Garmin Forerunner 210 might be the more direct competitor to the Run Trainer 2.0 given pricing, but I have not used it and thus cannot compare. It seems to differ mostly in offering fewer data field customization options.).

Pros-

1. Price – the Run Trainer 2.0 is is $75 cheaper than the FR610 if you buy it with the heart rate monitor, $125 cheaper if you already have an ANT+ HRM or don’t need one. Is the Forerunner 610 worth the extra money? If I was on a budget and was not already heavily invested in using Garmin Connect, I’d probably say no.

2. User Interface and Navigation – I vastly prefer the button interface and simplified menu system of the Run Trainer 2.0. The touchscreen on the FR610 is not particularly responsive and is a pain in the butt to use, especially when sweaty.

Cons-

1. Measures Slightly Short, Maybe – As I mentioned previously, I’m not sure which watch is correct, but the Run Trainer consistently measures routes about 1% shorter than the Garmin.

2. Pace – real-time pace seems less reliable to me on the Run Trainer 2.0

3. Data Screen Limitations – I like the ability to have 4 data fields on a screen on the FR610 (versus a max of 3 on the RT2), particularly for interval workouts. Not a deal breaker, but a preference for sure.

4. No Wireless Sync – I put this under cons because some people will prefer to have the wireless sync of the FR610. Personally, I have no problem syncing via USB, and it reminds me to charge the watch more frequently when I sync via a cord.

So there you have it – the Run Trainer 2.0 is a vast improvement over the original, and is a worthy competitor to some of the popular GPS watches produced by Garmin. What’s more, the price is reasonable for a small form-factor GPS watch with as many options as this one has. I’m glad I gave it a try!

The Timex Run Trainer 2.0 is available for purchase at Clever Training. Clever Training specializes in fitness electronics, and has agreed to provide a 10% off discount to Runblogger readers on most products that they carry – just enter the code RunBlogXJT at checkout. Purchases support this site and help me to write reviews like this one. Your support is very much appreciated!

Update 7/8/2014  –I have now posted a review of the Garmin Forerunner FR15. The FR15 is basically an update to the FR10 that adds step counting, heart rate monitor sync, and longer battery life.

One of the first reviews I wrote here on Runblogger was of the Garmin Forerunner 205 GPS watch. That was way back in April of 2009! I loved the 205, and it was a mainstay on my wrist for a long time. It tracked distance and pace accurately, provided a ton of customization options on its large screen, and the battery seemed to last forever. On the downside, the 205 was huge! It was not a watch that you’d wear around all day.

Last Christmas I finally upgraded to the Garmin Forerunner 610. From a functional standpoint, the 610 does pretty much everything the 205 does (with the exception of crazy long battery life), but does so in a smaller form factor that can stay on my wrist all day (no more swapping watches for workouts!).

I’ll have a review of the 610 coming soon, but I started this review with mentions of the 205 and 610 to make a point. When it comes to GPS watches, I’m a Garmin fan. I’ve tried watches from other brands, but none of them have yet satisfied my needs as well as Garmin watches do. A big part of that is that I can easily import Garmin data into Dailymile.com and Sporttracks, which are the two places I sync my running data. That fact alone has kept me loyal to Garmin.

A few weeks ago I entered a affiliate partnership with Clever Training whereby they’d occasionally provide me review samples of products that they carry (you can get 10% off most purchases at Clever Training by using the code RunBlogXJT – purchases support this site and allow me to write in-depth reviews like this one!). Here’s how it works – they send me a product, I try it out, write a review, then send it back to them. Their suggestion for a first review was the Garmin Forerunner 10 (FR10) GPS watch. I agreed to try it out, and have been using it for the last several weeks.

The FR10 is essentially the “entry-level” GPS watch in the Garmin lineup. I was initially skeptical about it as my experience with other more basic GPS watches has not been great (e.g., Soleus 1.0, Timex Run Trainer 1). They tend to lack the functionality that I look for, current pace tracking has been iffy, and easy export of data to my preferred sites/programs was lacking.

I’d read a few reviews of the FR10 which discussed its limitations, and I wasn’t sure I was going to like it. At $129.99 MSRP it’s the cheapest GPS enabled watch in Garmin’s lineup, and it lacks the customizability of siblings like the 205, 610, and so on. However, I’ve come to realize that the simplicity of the FR10 is its biggest strength, and I’ve actually been blown away by this little device. It pains me that I have to send it back!

Let’s dig into the review.

Size/Form Factor

First and foremost, compared to other GPS watches the Forerunner 10 is small. In fact, it’s not a whole lot bigger than a standard stopwatch that has no GPS. If you saw it on somebody’s wrist, you’d be hard-pressed to identify it as a GPS-enabled device.

 From left to right: Garmin Forerunner 610, FR10, and FR205. My cat Mokey seems to like the FR10 best, and the 610 still thinks it’s in Oregon.

Not only is its form-factor compact, the FR10 is also very light. My Garmin 205 and 610 weigh 2.8oz each, and the FR10 is only 1.5oz, and the difference is noticeable when wearing it on your wrist. It’s a super comfortable watch for all-day wear – hand’s down the best option I have tried for a GPS watch that stays out of the way. The FR10 also comes in a slightly smaller form factor for women with black, pink, green, and violet as color options (see photo at left).

Menus/Options

In terms of menu navigation, the FR10 is as simple as it gets, and this is a huge plus. I like my FR610, but the touch screen isn’t very user friendly and there are a ton of menus to sift through. The FR10 has only 4 buttons, and they are intuitive and super easy to use. On the top left is a backlight button. On the top right is a button that serves to initiate a workout and functions as the “enter key” in menus. Bottom left is a back button, and bottom right is the button you use to pull up and scroll menus. Simple!

I was most worried with how the FR10 would handle my data needs on the run. I loved the 205 because it had a big screen and I could configure the 4 data fields to show just about anything I wanted. I could also toggle between three separate screens, so that allowed 12 fields total! More than anyone really needs on the run, but I’m a data junkie. The FR10 limits you to only two data screens, each of which displays only two data fields. But, because there are only two fields, the text is large and easy to read.

There are 6 data field combos that can be shown on each screen: Time/Distance, Time/Pace, Time/Calories, Pace/Distance, Pace/Calories, Distance/Calories. You get to choose two of these via the Run Options—>Data Fields menu on the watch.

Sampling of data field display options

There is an additional level of customization for the Pace field. In the Run Options—>Pace/Speed menu you can configure the Pace field to show any of the following: Current Pace, Lap Pace, Average Pace, Speed, Lap Speed, Average Speed. You only get to choose one, so you can’t have one data screen show Current Pace and another show Average Pace. I mainly use Current Pace, and I have auto-lap enabled so after each mile it spits out my lap time, so it gives me what I need.

Other menus include a nice History menu that allows you to view your data from each run (see photo below), and a Records menu that records your fasted time at the mile, 5K, 10K, Half-Marathon, and Marathon distances (also longest run). In the Run Options menu there is a Virtual Pacer that allows you to set a target pace and get alerted if you deviate, and a Run-Walk/Interval option where you can set run times and walk/recovery times. You can also turn on/off a manual lap button (lower left button during a workout).

Summary data from yesterday’s 10 mile run

Performance

I’ve used the Garmin Forerunner 10 on almost every run for the past several weeks. I even wore it when I ran the Vermont City Marathon a few weeks ago, with the FR610 on the other wrist for comparative purposes. I did another 10 mile run with both watches yesterday for a final test.

I have to say that I’ve fallen in love with this watch – when wearing both the FR10 and FR610 I often find myself looking at the FR10 more often than I look at the FR610. If it weren’t for just a few missing features (e.g., wireless data transfer, better interval workout capability, foot-pod sync) I’d consider selling my 610 on Ebay and buying FR10’s for myself and my wife.

As I mentioned above, my main data screen on the FR10 while I run displays current pace and distance. I have Time/Pace on the second screen. For the majority of runners that’s all that’s really necessary. Most of the time that’s all that I need as well.

What I love most about the FR10 is that the current pace readout is rock-solid. It reports pace in 5 second increments, so 8:00/mile, 8:05/mile, 8:10/mile etc. At first I didn’t think I’d like this, but what it accomplishes is a lot less fluctuation in current pace readout (and let’s be serious, current pace readouts on GPS watches probably aren’t accurate to the second). When running my marathon, I relied on the FR10 almost exclusively for real-time pacing and used the FR610 for it’s lap display (the main reason why I’ll keep it – being able to display lap time, lap distance, current pace, and lap pace all on one screen).

I have found tracking accuracy in the FR10 to be right in line with the much more expensive FR610. In fact, the FR10 measured the Vermont City Marathon course more closely than the 610 (26.37 miles for the FR10 vs. 26.48 miles for the 610 – need to work on running those tangents!). On my 10 miler yesterday, the FR10 measured 10.13 miles at an average pace of 8:22/mile, the 610 measured 10.12 miles at an average pace of 8:23. Pretty solid agreement! The Forerunner 10 has earned my complete confidence in its ability to track pace and distance.

The FR10 is rated at 5 hours of battery life with the GPS on, and it made it through my marathon no problem. It’s not the life that my old 205 had (I swear that thing had a Prius battery in it and recharged while I ran), but it’s sufficient for my needs up to now.

My only performance complaint about the FR10 is that it tends to not track that well under dense tree-cover (few watches that I have used do this well). If ultras are your thing, the combo of 5-hour battery life while recording and sub-par forest performance mean you should look elsewhere.

One other thing to note – as an entry-level watch the FR10 does not include a heart rate monitor. I don’t generally use a heart rate monitor, so no big deal for me.

Data Export

As mentioned above I use Dailymile.com and Sporttracks to store my run data. The FR10 syncs with Sporttracks without issue, but dailymile import does not seem to be supported at this time (note – I initially reported that it does sync with dailymile – this was an error on my part as it was uploading the data from my 610, not the 10 – I was wearing them both on the same runs for comparison). I’ve also started using Garmin Connect a bit and really like it. If I hadn’t been using Sporttracks for years I might even consider using Garmin Connect as my main run storage location. Below is a sample screen from Garmin Connect showing the FR10 recording of my run at the Vermont City Marathon:

As an entry-level watch, the FR10 does not upload wirelessly (I like this feature of the 610). It connects via a USB cable that snaps securely into place on the back of the watch.

Garmin FR10 – Sync Cable and Back of Watch

Garmin FR10 – Sync Cable

The only data I typically look at that is not recorded on-board the FR10 is elevation (e.g., you can’t get elevation in SportTracks). However, when you upload the data from the watch to Garmin Connect you can view an elevation profile that is based on your GPS track (I suppose similar to how a site like MapMyRun or GMap Pedometer computes elevation profiles when you create a route manually on a map). Otherwise the data I get in Sporttracks is essentially the same as the data I get from the 610.

Summary

Given the fact that the Garmin Forerunner 10 is positioned as an entry-level GPS watch, I wasn’t expecting to love it as much as I do. Everything that it does, it does well, and for the majority of my runs it’s really all that I need. The only place it falls behind a bit is when I need more detailed lap data for an interval workout. Other than that, I could easily see using this is my full-time GPS watch, and given how much smaller and lighter it is than the FR610, I’m half-tempted to buy one for myself as an all-day watch and save the FR610 for more complex workouts (though I’d have a hard time justifying that purchase to my wife!).

The FR10 is an ideal GPS watch for a beginning runner, and for the experienced runner who doesn’t much care about anything besides how fast and far they ran, it is an equally good choice. At $129.99 MSRP the price is right as well.

Big thumbs up for the Garmin Forerunner 10!

Update 7/8/2014  –I have now posted a review of the Garmin Forerunner FR15. The FR15 is basically an update to the FR10 that adds step counting, heart rate monitor sync, and longer battery life.

The Garmin Forerunner 10 is available for purchase at Clever Training in the colors seen below. Clever Training specializes in fitness electronics, and has agreed to provide a 10% off discount to Runblogger readers on most products that they carry – just enter the code RunBlogXJT at checkout. Purchases support this site and help me to write reviews like this one. Your support is very much appreciated!

There were a total of 976 entries, and the winner was:

Adam Protass!

Congrats Adam, and thanks to Clever Training for sponsoring the giveaway and providing the Garmin FR10.

Clever Training has offered to host giveaways like this on a regular basis going forward, so stay tuned for the next one. In the meantime, if you have any fitness gear needs, you can take advantage of a Runblogger 10% off discount at Clever Training by using the code RunBlogXJT at checkout. You save some cash, and purchases help to support the work done here on Runblogger.

As always, your support is very much appreciated!

The folks at Clever Training contacted me several weeks ago about developing a relationship, and after talking with them we were able to work out an agreement whereby Runblogger readers can get 10% off any item that they carry in their on-line store (with some exceptions for current sale items – for example, they have a current sale running with some great prices on several popular GPS watches). I get a small commission for each sale, so purchases help to support the work that I do here on Runblogger. This discount works on regularly priced GPS devices and other electronic gadgets, so it can provide a significant savings on an expensive purchase should you be in the market for a new toy!

To take advantage of the 10% discount, simply visit Clever Training and enter the code RunBlogXJT in the coupon field of the Shopping Cart. You can also click through the banners in my right sidebar or at the bottom of each post and use the code to take advantage of the discount. As always, your support is very much appreciated and helps me to keep the site going (especially now that writing this blog is my full-time job – I need all the help I can get!).

One attractive part of the offer that Clever Training presented me, and one which makes it a bit different than some of the other discounts I advertise, was that they agreed to host periodic giveaways for Runblogger readers. As part of the kickoff of our partnership, they offered up a Garmin Forerunner 10 GPS watch for a giveaway. Expect more to come!

To enter the Clever Training Garmin FR10 giveaway, use the Rafflecopter form below: